Journey 13XX Firmware Application Process Version 4.2

Descrip­tion
Update from FHD 1.6 to 1.14

Items Need­ed
3 FAT32 USB Flash Dri­ves. (Or one that can be over­writ­ten with each step)

Soft­ware Need­ed
Firmware, Android APK Files

Firmware Files
ftp://qomo08.pointto.us/InteractiveProducts/Journey/13xx/Firmware/13XX_2KFHD_1_11.zip
ftp://qomo08.pointto.us/InteractiveProducts/Journey/13xx/Firmware/13XX_2KFHD_1_14.zip

APK
ftp://qomo08.pointto.us/InteractiveProducts/Journey/13xx/Firmware/13xx_APK_1_7+.zip

Prerequisite:

  1. Check the cur­rent firmware (Soft­ware ver­sion) on Jour­ney 13 pan­el
  2. From the main Android screen select “SETTINGS
  3. Then select “ABOUT
  4. On the right hand side of screen near bot­tom will be soft­ware ver­sion. Ensure it is the fol­low­ing
    1. SWKJD_MSD828_QOMO_IRKJD_FHD_MCU_2G_16G_20170328_V1.6

Section 1: Software prep

  1. Down­load all files spec­i­fied and unzip to indi­vid­ual flash dri­ves. If only one dri­ve avail­able start with firmware 1.11 unzipped to flash dri­ve first. (Label flash dri­ves)
  2. Pow­er Off Pan­el
  3. Insert the flash dri­ve con­tain­ing 1.11 firmware into the front Android USB port.

Section 2: Firmware Update 1.6 to 1.11

  1. With the unit in the pow­ered off state, press and hold the pow­er but­ton until the fol­low­ing screen appears.

  2. Unit will pow­er itself off when this step is com­plete.

  3. Remove flash dri­ve

  4. Pow­er on unit (First pow­er up will take about 5 min while upgrade com­pletes) Dur­ing this time you will see the word “Android” in the low­er right cor­ner

  5. Select Eng­lish lan­guage and press start

Section 3: Firmware Update 1.11 to 1.14

  1. Pow­er Off Pan­el

  2. Insert the flash dri­ve con­tain­ing 1.14 firmware into the front Android USB port.

  3. With the unit in the pow­ered off state, press and hold the pow­er but­ton until the fol­low­ing screen appears.

  4. Unit will reboot itself off when com­plete.

  5. Dur­ing this time you will see the word “Android” in the low­er right cor­ner

  6. You will also see Android is upgrad­ing / Opti­miz­ing apps (Sim­i­lar to cell phone)

  7. Unit will boot to main screen auto­mat­i­cal­ly

Section 4: Application installation (APK)

  1. Unzip 13XX_APK _1_7+.zip to a flash dri­ve.

  2. Insert flash dri­ve to the front Android USB port.

  3. Open the ESfile explor­er and select LOCAL \ sda1 (to access your flash dri­ve)

  4. Click each APK file and select INSTALL, then fol­low prompts. (Cur­rent APK ZIP file con­tents may dif­fer from pic­ture)

  5. Restart Pan­el

  6. UPDATE COMPLETE

Section 5: Final Steps

  1. Log into Google Play­store and allow pan­el to update for 15 min­utes.
  2. Load your favorite apps such as Youtube, Google Docs, etc.
  3. Any issue please con­tact support@qomo.com (with screen shots of issues if pos­si­ble)
  4. If Eshare prompts for acti­va­tion code please con­tact support@qomo.com